Bahco 23-24 Raker Tooth Hp Bowsaw Blade 24In

Product Information

You might see carpenters putting their finger or thumb down to guide the saw – avoid this with a bow saw as there’s a good chance that it’ll end with you cutting yourself. Prices for replacement bow saw blades vary, so it’s worth shopping around for replacements. A higher price often means a better quality saw blade. Cheap bow saw blades often cut poorly and seldom represent good value. Tension Adjusters The seasoned wood blade is the one with traditional saw teeth (top in the photo above), up and down like shark’s teeth. The greenwood blade is the one with the ‘W’ shaped tooth every 5 teeth. This is known as a raker tooth and it’s job is pretty much as it says on the tin, it rakes out sawdust as you’re cutting. When you’re cutting greenwood the sawdust can often get clogged up in the cut; the raker tooth drags out the sawdust so that the blade moves freely. In my experience the greenwood blade will cut through seasoned wood with ease, whereas the seasoned wood blade doesn’t perform well with greenwood. So if I’m only taking one blade, I take a greenwood blade. Safety guards The heat-treated steel teeth of the bow saw blade can retain their sharp edge for many years of the blade is correctly cared for after use. The blade should be carefully wiped off after cutting green lumber as the plant juices can cause the steel to rust. A light application of thin oil (WD40) will prevent rust and keep the blade lasting longer. Blades are designed for cutting green wood or dry wood, and you can limit your risk by having one blade for each purpose. Summary

Saw blades are usually rated by TPI (teeth per inch). The more teeth the saw has, the smoother the cut. However, a high TPI blade may cause sawdust to get caught in the gullets or the gaps between teeth, which can slow down the cutting process and can overheat the blade (shortening its life span). Bow saw blades are quite coarse—as few as 3 TPI and rarely more than 14—allowing them to make fast, aggressive cuts. Low TPI blades are great for greenwood; higher TPI models are better when cutting lumber. A visit to any hardware store or online shop will reveal a large selection of saws, many of which are easy to use thanks to corded or cordless power. Even so, these multifunctional saws cannot compare to the simplicity, affordability, and portability of the bow saw—making it an ideal choice for gardeners, survivalists, framers, and roofers. Though the best bow is a basic tool, there are still aspects that warrant a closer look. Here are a few key considerations to make when shopping for the best bow saw. Blades Make sure that you’re cutting a length off the end, this way as you saw through the weight of the log will open up the cut as you go.

Safety guards

The design of the three-hinged trapezium-shaped frame enables you to cut wood of a large diameter. The blade is safely folded into the frame when the bow saw is not in use, protecting both the saw blade and you from harm.

Many manufacturers don’t mention TPI. Instead, the bow saw blade is specified as either wet cutting or dry cutting. Wet wood is more likely to bind the blade, so this blade will have fewer teeth (lower TPI). They may also be “raker-set,” where each pair is offset. Raker-set blades make a wider cut, clearing waste as they go. Unlike many other kinds of saw blades—which only cut on the push stroke—a bow saw often cuts in both directions. Do you intend to saw dry wood and planks to size or cut live branches and shrubbery? Although you can use any bow saw for light sawing projects, there are some design aspects. For instance, bows designed for dry wood have a peg tooth blade that spreads the work reducing clogging while green wood bows have rake-like teeth to clear out fresh waste. b. Overall lengthBow saws come in many lengths and sizes. They range from smaller lengths of between 14 to 18 inches suitable for light gardening and pruning all the way to massive 30 inch blades designed for intensive tasks like logging and felling. c. Other features

A bow saw, with its sharp, aggressive teeth, is the ideal thing for sawing through large chunks of wood such as firewood. It can also be used for woodworking purposes, making straight or curved cuts. Bow saws come in a range of blade lengths from 12-inches to 36-inches with modern ergonomics integrated into the tried and tested basic design. The modern bow saw is used from a small pruning version to a compact foldable lightweight camping tool to the full-size bow saw for cutting down trees and branches in the lumber industry. Using a three sided file, give each tooth three to four strokes until all the teeth are equal shapes and the base of the teeth is straight. If all the teeth are facing straight up, bend each alternate one to either side so the cut of the saw is wider than the blade. This means it shouldn’t catch on the material you are cutting. It goes without saying that power saws are out of the question. Some of these monsters don’t have the gentle touch required not to absolutely obliterate small wood, metal, and plastic projects. What you need is a bow saw – a small, portable handheld saw that is more comfortable, effective, affordable, and more practical for smaller jobs than a chainsaw. So, how do you get the right saw for the job? Key Features to Look for When Buying a Bow Saw a. Intended purposeDepending on the size of the tree, you can cut one down with a bow saw. You need to determine the size of it first – if it is a Redwood size then you won’t stand a chance with a bow saw, you would need specialist equipment. If it is a small sapling then you can cut it down with a bow saw. Some bow saws, particularly folding bow saws, are made of aluminum. It’s not quite as strong as steel but is considerably lighter and thus the perfect tool to bring on a camping or hiking trip.